Next-generation anti-PD-L1/IL-15 immunocytokine elicits superior antitumor immunity in cold tumors with minimal toxicity.

The clinical applications of immunocytokines are severely restricted by dose-limiting toxicities. To address this challenge, here we propose a next-generation immunocytokine concept involving the design of LH05, a tumor-conditional anti-PD-L1/interleukin-15 (IL-15) prodrug. LH05 innovatively masks IL-15 with steric hindrance, mitigating the "cytokine sink" effect of IL-15 and reducing systemic toxicities associated with wild-type anti-PD-L1/IL-15. Moreover, upon specific proteolytic cleavage within the tumor microenvironment, LH05 releases an active IL-15 superagonist, exerting potent antitumor effects. Mechanistically, the antitumor efficacy of LH05 depends on the increased infiltration of CD8+ T and natural killer cells by stimulating the chemokines CXCL9 and CXCL10, thereby converting cold tumors into hot tumors. Additionally, the tumor-conditional anti-PD-L1/IL-15 can synergize with an oncolytic virus or checkpoint blockade in advanced and metastatic tumor models. Our findings provide a compelling proof of concept for the development of next-generation immunocytokines, contributing significantly to current knowledge and strategies of immunotherapy.

Lateral Heterostructure Formed by Highly Thermally Conductive Fluorinated Graphene for Efficient Device Thermal Management.

The continued miniaturization of chips demands highly thermally conductive materials and effective thermal management strategies. Particularly, the high-field transport of the devices built with 2D materials is limited by self-heating. Here a systematic control of heat flow in single-side fluorinated graphene (FG) with varying degrees of fluorination is reported, revealing a superior room-temperature thermal conductivity as high as 128 W m-1 K-1. Monolayer graphene/FG lateral heterostructures with seamless junctions are approached for device fabrication. Efficient in-plane heat removal paths from graphene channel to side FG are created, contributing significant reduction of the channel peak temperature and improvement in the current-carrying capability and power density. Molecular dynamics simulations indicate that the interfacial thermal conductance of the heterostructure is facilitated by the high degree of overlap in the phonon vibrational spectra. The findings offer novel design insights for efficient heat dissipation in micro- and nanoelectronic devices.

Influence of Material Parameter Variability on the Predicted Coronary Artery Biomechanical Environment via Uncertainty Quantification.

Central to the clinical adoption of patient-specific modeling strategies is demonstrating that simulation results are reliable and safe. Indeed, simulation frameworks must be robust to uncertainty in model input(s), and levels of confidence should accompany results. In this study, we applied a coupled uncertainty quantification-finite element (FE) framework to understand the impact of uncertainty in vascular material properties on variability in predicted stresses. Univariate probability distributions were fit to material parameters derived from layer-specific mechanical behavior testing of human coronary tissue. Parameters were assumed to be probabilistically independent, allowing for efficient parameter ensemble sampling. In an idealized coronary artery geometry, a forward FE model for each parameter ensemble was created to predict tissue stresses under physiologic loading. An emulator was constructed within the UncertainSCI software using polynomial chaos techniques, and statistics and sensitivities were directly computed. Results demonstrated that material parameter uncertainty propagates to variability in predicted stresses across the vessel wall, with the largest dispersions in stress within the adventitial layer. Variability in stress was most sensitive to uncertainties in the anisotropic component of the strain energy function. Moreover, unary and binary interactions within the adventitial layer were the main contributors to stress variance, and the leading factor in stress variability was uncertainty in the stress-like material parameter that describes the contribution of the embedded fibers to the overall artery stiffness. Results from a patient-specific coronary model confirmed many of these findings. Collectively, these data highlight the impact of material property variation on uncertainty in predicted artery stresses and present a pipeline to explore and characterize forward model uncertainty in computational biomechanics.

Influence of material parameter variability on the predicted coronary artery biomechanical environment via uncertainty quantification.

Central to the clinical adoption of patient-specific modeling strategies is demonstrating that simulation results are reliable and safe. Indeed, simulation frameworks must be robust to uncertainty in model input(s), and levels of confidence should accompany results. In this study, we applied a coupled uncertainty quantification-finite element (FE) framework to understand the impact of uncertainty in vascular material properties on variability in predicted stresses. Univariate probability distributions were fit to material parameters derived from layer-specific mechanical behavior testing of human coronary tissue. Parameters were assumed to be probabilistically independent, allowing for efficient parameter ensemble sampling. In an idealized coronary artery geometry, a forward FE model for each parameter ensemble was created to predict tissue stresses under physiologic loading. An emulator was constructed within the UncertainSCI software using polynomial chaos techniques, and statistics and sensitivities were directly computed. Results demonstrated that material parameter uncertainty propagates to variability in predicted stresses across the vessel wall, with the largest dispersions in stress within the adventitial layer. Variability in stress was most sensitive to uncertainties in the anisotropic component of the strain energy function. Moreover, unary and binary interactions within the adventitial layer were the main contributors to stress variance, and the leading factor in stress variability was uncertainty in the stress-like material parameter that describes the contribution of the embedded fibers to the overall artery stiffness. Results from a patient-specific coronary model confirmed many of these findings. Collectively, these data highlight the impact of material property variation on uncertainty in predicted artery stresses and present a pipeline to explore and characterize forward model uncertainty in computational biomechanics.

Stepwisely Assembled Multicomponent Fiber with High Water Content and Superior Mechanical Properties for Artificial Ligament.

The ligament, which connects bones at the joints, has both high water content and excellent mechanical properties in living organisms. However, it is still challenging to fabricate fibrous materials that possess high water content and ligament-like mechanical characteristics simultaneously. Herein, the design and preparation of a ligament-mimicking multicomponent fiber is reported through stepwise assembly of polysaccharide, calcium, and dopamine. In simulated body fluid, the resulting fiber has a water content of 40 wt%, while demonstrating strength of ≈120 MPa, a Young's modulus of ≈3 GPa, and a toughness of ≈25 MJ m-3 . Additionally, the multicomponent fiber exhibits excellent creep and fatigue resistance, as well as biocompatibility to support cell growth in vitro. These findings suggest that the fiber has potential for engineering high-performance artificial ligament.

Smart Hydrogels for Tissue Regeneration.

The rapid growth in the portion of the aging population has led to a consequent increase in demand for biomedical hydrogels, together with an assortment of challenges that need to be overcome in this field. Smart hydrogels can autonomously sense and respond to the physiological/pathological changes of the tissue microenvironment and continuously adapt the response according to the dynamic spatiotemporal shifts in conditions. This along with other favorable properties, make smart hydrogels excellent materials for employing toward improving the precision of treatment for age-related diseases. The key factor during the smart hydrogel design is on accurately identifying the characteristics of natural tissues and faithfully replicating the composition, structure, and biological functions of these tissues at the molecular level. Such hydrogels can accurately sense distinct physiological and external factors such as temperature and biologically active molecules, so they may in turn actively and promptly adjust their response, by regulating their own biological effects, thereby promoting damaged tissue repair. This review summarizes the design strategies employed in the creation of smart hydrogels, their response mechanisms, as well as their applications in field of tissue engineering; and concludes by briefly discussing the relevant challenges and future prospects.

Association of red blood cell distribution width to albumin ratio with the prognosis of acute severe pulmonary embolism: A cohort study.

Red blood cell distribution width (RDW) to human serum albumin (ALB) ratio (RDW/ALB Ratio, RAR) is a prognostic factor for adverse outcomes in different disease populations. However, the relationship between RAR and pulmonary embolism outcomes remains unclear. Therefore, this study set out to investigate the association between RAR and the risk of all-cause death in acute pulmonary embolism (APE) patients admitted to the intensive care unit (ICU). This is a retrospective study based on the MIMIC-IV database. The primary outcome was all-cause mortality among patients with APE (in-hospital and 1-year mortality). The relationship between RAR and all-cause mortality was assessed using Cox regression analysis. The survival curve was drawn to evaluate the predictive value of RAR for patient mortality. Correlations and threshold effects between RAR and all-cause mortality were analyzed using the generalized additive model (GAM). The study included 773 patients, and fully adjusted Cox regression models showed that RAR was associated with higher all-cause mortality in the hospital and one year later (all P < .05). In the GAM, the relationship between RAR and all-cause mortality was shown to be nonlinear, with a positive association between RAR and all-cause mortality in APE patients when RAR values were at low to moderate levels. This study revealed a significant association between RAR and the risk of all-cause day death in patients with pulmonary embolism. Higher RAR value was associated with increased in-hospital mortality and 1-year mortality.

Scalable microfluidic fabrication of vertically aligned two-dimensional nanosheets for superior thermal management.

Two-dimensional (2D) nanosheets have been assembled into various macroscopic structures for wide engineering applications. To fully explore their exceptional thermal, mechanical, and electrical properties, 2D nanosheets must be aligned into highly ordered structures due to their strong structural anisotropy. Structures stacked layer by layer such as films and fibers have been readily assembled from 2D nanosheets due to their planar geometry. However, scalable manufacturing of macroscopic structures with vertically aligned 2D nanosheets remains challenging, given their large lateral size with a thickness of only a few nanometers. Herein, we report a scalable and efficient microfluidics-enabled sheet-aligning process to assemble 2D nanosheets into a large-area film with a highly ordered vertical alignment. By applying microchannels with a high aspect ratio, 2D nanosheets were well aligned vertically under strong channel size confinement and high flow shear stress. A vertically aligned graphene sheet film was obtained and applied to effectively improve the heat transfer of thermal interfacial materials (TIMs). Superior through-plane thermal conductivity of 82.7 W m-1 K-1 at a low graphene content of 11.8 vol% was measured for vertically aligned TIMs. Thus, they demonstrate exceptional thermal management performance for switching power supplies with high reliability.

Vertically Aligned Boron Nitride Nanosheets Films for Superior Electronic Cooling.

Thermally conductive and electrically insulating thermal interface materials (TIMs) are highly desired for electronic cooling. To improve heat transfer efficiency, thermally conductive fillers with a high loading content have been incorporated into the polymer-based TIMs. However, this is usually at the expense of the interfacial thermal resistance reduction and reliability. In this study, vertically aligned boron nitride nanosheet films (VBNFs) have been prepared by a scalable microfluidic spinning process and template-assisted chemical vapor deposition conversion method. A further high-temperature annealing was applied to achieve high crystallinity. VBNFs have been applied as fillers to fabricate TIMs and achieve a superior through-plane thermal conductivity of 6.4 W m-1 K-1 and low modulus of 2.2 MPa at low BN loading of 9.85 vol %, benefitting from the well-aligned vertical sheet structure and high crystallinity. In addition, the fabricated TIMs present high-volume resistivity and breakdown strength, satisfying the electrical insulation demands. The high thermal conductivity and low modulus contribute an outstanding cooling performance to the TIMs in the heat dissipation application for high-power LEDs. This template-assisted conversion technology for the fabrication of orientated BN nanosheets structure and the prepared high-performance TIMs pave the way for efficient thermal management of high-power electronics.

High biocompatible polyacrylamide hydrogels fabricated by surface mineralization for subchondral bone tissue engineering.

The subchondral bone is an important part of cartilage which contains a large amount of hydroxyapatite. The mineral components of subchondral bone is the key factor which determines the biomechanical strength, and then affects the biological function of articular cartilage. Here, a mineralized polyacrylamide (PAM-Mineralized) hydrogel with good ALP activity, cell adhesion and biocompatibility was fabricated for subchondral bone tissue engineering. The micromorphology, composition and mechanical properties of PAM and PAM-Mineralized hydrogels were studied. The PAM hydrogels showed a porous structure, while the PAM-Mineralized hydrogels had well-distributed layers of hydroxyapatite mineralization on the surface. The XRD results show that the characteristic peak of hydroxyapatite (HA) was measured in PAM-Mineralized, indicating that the main component of the mineralized structure formed on the surface of the hydrogel after mineralization is HA. The formation of HA ectively decreased the rate of equilibrium swelling of the PAM hydrogel, with PAM-M reaching swelling equilibrium at 6 h. Meanwhile, compressive strength of PAM-Mineralized hydrogel (moisture state) reached 290 ± 30 kPa, compressive modulus reached 130 ± 4 kPa. PAM-Mineralized hydrogels did not affect the growth and proliferation of MC3T3-E1 cells. Surface mineralization of PAM hydrogel could significantly improve osteogenic differentiation of MC3T3-E1 cells. These results showed that PAM-Mineralized hydrogel could possess potential application in the field of subchondral bone tissue engineering.

Universal chimeric Fcγ receptor T cells with appropriate affinity for IgG1 antibody exhibit optimal antitumor efficacy.

Developing universal CARs with improved flexible targeting and controllable activities is urgently needed. While several studies have suggested the potential of CD16a in tandem with monoclonal antibodies to construct universal CAR-T cells, the weak affinity between them is one of the limiting factors for efficacy. Herein, we systematically investigated the impact of Fcγ receptor (FcγR) affinity on CAR-T cells properties by constructing universal CARs using Fcγ receptors with different affinities for IgG1 antibodies, namely CD16a, CD32a, and CD64. We demonstrated that the activities of these universal CAR-T cells on tumor cells could be redirected and regulated by IgG1 antibodies. In xenografted mice, 64CAR chimeric Jurkat cells with the highest affinity showed significant antitumor effects in combination with herceptin in the HER2 low expression U251 MG model. However, in the CD20 high expression Raji model, 64CAR caused excessive activation of CAR-T cells, which resulted in cytokine release syndrome (CRS) and the decline of antitumor activity, and 32CAR with a moderate affinity brought the best efficacy. Our work extended the knowledge about FcγR-based universal CAR-T cells and suggested that only the FcγRCAR with an appropriate affinity can offer the optimal antitumor advantages of CAR-T cells.

Oxidation and reduction analysis of therapeutic recombinant human interleukin-15 by HPLC and LC-MS.

Being an important immune stimulant of T lymphocytes and NK cells, the recombinant human interleukin-15 (rhIL-15) has been extensively researched in tumor immunotherapy or as a vaccine adjuvant. However, the rhIL-15 manufacturing level lags far behind its growing clinical demand due to the lack of efficient and exact analysis methodologies to characterize the trace by-products, typically redox and deamidation. In order to improve the production and quality control of rhIL-15, here we developed an expanded resolution reverse-phase high-performance liquid chromatography (ExRP-HPLC) approach to quickly and accurately analyze the oxidation and reduction by-products of rhIL-15, which may appear during the purification processes. Firstly, we developed RP-HPLC methods which can separate rhIL-15 fractions with different levels of oxidization or reduction, respectively, and the redox status of each peak was then determined by measuring the intact mass with a high-resolution mass spectrometer (UPLC-MS). To further clarify the complex pattern of oxidization of specific residues, the peaks with various oxidation levels were digested into pieces for peptide mapping to pinpoint the exact changes of oxygen and hydrogen atoms in the rhIL-15 by-products. In addition, we performed the ExRP-HPLC and UPLC-MS analysis of partially deamidated rhIL-15 to characterize their oxidation and reduction. Our work is the first in-depth characterization of the redox by-products of rhIL-15, even for deamidated impurities. The ExRP-HPLC method we reported can facilitate the rapid and accurate quality analysis of rhIL-15, which is substantially helpful for streamlining the industrial manufacturing of rhIL-15 to better meet the demands of clinical applications. KEYPOINTS: • The oxidization and reduction rhIL-15 by-products were characterized for the first time. • The changes of oxygen and hydrogen atoms in rhIL-15 redox by-products were accurately determined by UPLC-MS. • Oxidation and reduction by-products of deamidated rhIL-15 were further analyzed.

Ferroptosis-related NFE2L2 and NOX4 Genes are Potential Risk Prognostic Biomarkers and Correlated with Immunogenic Features in Glioma.

Ferroptosis is a newfound mode of regulated cell death that may have potential to associate with prognostic or diagnostic factors in glioma. In this research, 5 genes related to glioma were screened through the FerrDb database, and we analyzed the combination between genes and glioma of survival and prognosis via TCGA, GEPIA, TIMER, and other databases. Survival curve and prognostic analysis showed that the overexpression of NFE2L2 and NOX4, respectively, has a remarkable link with a worse prognosis in glioma. Then, the association between the expression of the two genes and tumor-infiltrating immune cells level was explored based on the GSCA, and the immunity of NFE2L2 and NOX4 based on the TISIDB database was also investigated. In glioma, especially GBM, there is a strong association between gene expression and immune infiltration, even in macrophages, nTreg, and Th2 cells, which play immunosuppressive functions in TME. In conclusion, these results indicate that NFE2L2 and NOX4 could be risk prognosis biomarkers in glioma, and they bound up with immune infiltration and tumor immunity in tumorigenesis.

Polymer Complex Fiber: Property, Functionality, and Applications.

Polymer complex fibers (PCFs) are a novel kind of fiber material processed from polymer complexes that are assembled through noncovalent interactions. These can realize the synergy of functional components and miscibility on the molecular level. The dynamic character of noncovalent interactions endows PCFs with remarkable properties, such as reversibility, stimuli responsiveness, self-healing, and recyclability, enabling them to be applied in multidisciplinary fields. The objective of this article is to provide a review of recent progress in the field of PCFs. The classification based on chain interactions will be first introduced followed by highlights of the fabrication technologies and properties of PCFs. The effects of composition and preparation method on fiber properties are also discussed, with some emphasis on utilizing these for rational design. Finally, we carefully summarize recent advanced applications of PCFs in the fields of energy storage and sensors, water treatment, biomedical materials, artificial actuators, and biomimetic platforms. This review is expected to deepen the comprehension of PCF materials and open new avenues for developing PCFs with tailor-made properties for advanced application.

UncertainSCI: Uncertainty quantification for computational models in biomedicine and bioengineering.

BACKGROUND: Computational biomedical simulations frequently contain parameters that model physical features, material coefficients, and physiological effects, whose values are typically assumed known a priori. Understanding the effect of variability in those assumed values is currently a topic of great interest. A general-purpose software tool that quantifies how variation in these parameters affects model outputs is not broadly available in biomedicine. For this reason, we developed the 'UncertainSCI' uncertainty quantification software suite to facilitate analysis of uncertainty due to parametric variability. METHODS: We developed and distributed a new open-source Python-based software tool, UncertainSCI, which employs advanced parameter sampling techniques to build polynomial chaos (PC) emulators that can be used to predict model outputs for general parameter values. Uncertainty of model outputs is studied by modeling parameters as random variables, and model output statistics and sensitivities are then easily computed from the emulator. Our approaches utilize modern, near-optimal techniques for sampling and PC construction based on weighted Fekete points constructed by subsampling from a suitably randomized candidate set. RESULTS: Concentrating on two test cases-modeling bioelectric potentials in the heart and electric stimulation in the brain-we illustrate the use of UncertainSCI to estimate variability, statistics, and sensitivities associated with multiple parameters in these models. CONCLUSION: UncertainSCI is a powerful yet lightweight tool enabling sophisticated probing of parametric variability and uncertainty in biomedical simulations. Its non-intrusive pipeline allows users to leverage existing software libraries and suites to accurately ascertain parametric uncertainty in a variety of applications.

A facile method to fabricate high performance PVA/PAA-AS hydrogel via the synergy of multiple hydrogen bonding and Hofmeister effect.

Hydrogels are widely used in biomedical engineering, which often require matched mechanical properties to meet specific demands. Recently, numerous research studies have contributed to tissue engineering hydrogels by soaking strategies to obtain designed properties. Herein, a strategy to fabricate poly(vinyl alcohol)/poly(acrylic acid)-ammonium sulfate (PVA/PAA-AS) hydrogel by successively soaking an aqueous PAA solution and (NH4)2SO4 solution based on the synergy of multiple hydrogen bonding and Hofmeister effect is reported, which exhibits remarkable comprehensive mechanical properties: rigidity (elastic modulus: 0.7-3.6 MPa), strength at break (tensile stress: 3.2-12.0 MPa; strain 320-650%), and toughness (fracture energy: 4.5-30.0 MJ m-3). Besides, PVA/PAA-AS hydrogel with unique spring-like microstructure exhibited super-resilience in 30% strain range by energy-transforming mechanism. Compared with pure PVA hydrogel, PVA/PAA-AS hydrogel has the equal excellent cytocompatibility. Therefore, PVA/PAA-AS hydrogel with high strength, modulus, toughness, super-resilience and excellent biocompatibility has potential applications in the soft tissue engineering field such as muscles, tendons, and ligaments.

A novel anti-PD-L1/IL-15 immunocytokine overcomes resistance to PD-L1 blockade and elicits potent antitumor immunity.

Despite the demonstrated immense potential of immune checkpoint inhibitors in various types of cancers, only a minority of patients respond to these therapies. Immunocytokines designed to deliver an immune-activating cytokine directly to the immunosuppressive tumor microenvironment (TME) and block the immune checkpoint simultaneously may provide a strategic advantage over the combination of two single agents. To increase the response rate to checkpoint blockade, in this study, we developed a novel immunocytokine (LH01) composed of the antibody against programmed death-ligand 1 (PD-L1) fused to interleukin (IL)-15 receptor alpha-sushi domain/IL-15 complex. We demonstrate that LH01 efficiently binds mouse or human PD-L1 and maintains IL-15 stimulatory activity. In syngeneic mouse models, LH01 showed improved antitumor efficacy and safety versus anti-PD-L1 plus LH02 (Fc-sushi-IL15) combination and overcame resistance to anti-PD-L1 treatment. Mechanistically, the dual anti-immunosuppressive function of LH01 activated both the innate and adaptive immune responses and induced a favorable and immunostimulatory TME. Furthermore, combination therapy with LH01 and bevacizumab exerts synergistic antitumor effects in an HT29 colorectal xenograft model. Collectively, our results provide supporting evidence that fusion of anti-PD-L1 and IL-15 might be a potent strategy to treat patients with cold tumors or resistance to checkpoint blockade.

A homodimeric IL-15 superagonist F4RLI with easy preparation, improved half-life, and potent antitumor activities.

Interleukin-15 (IL-15) is a promising candidate for cancer immunotherapy due to its potent immune-activating effects. There are several IL-15 molecules currently in clinical trials but facing shortages of poor half-life, circulation instability, or complicated production and quality control processes. The aim of this study is to design a novel IL-15 superagonist to set out the above difficulties, and we constructed F4RLI consisting of the GS-linker spaced IgG4 Fc fragment, soluble IL-15 Rα (sIL-15Rα), and IL-15(N72D). Using a single plasmid transient transfection in HEK293E cells, the matured F4RLI was secreted in the form of homodimer and got purified by an easy step of protein A affinity chromatography. The F4RLI product can significantly stimulate the proliferation of human CD3+CD8+ T cells and NK cells in vitro. Meanwhile, F4RLI greatly extended the half-life and prolonged the exposure of IL-15 in mice nearly by 28- and 200-fold, respectively, in comparison with that of the IL-15 monomer. In vivo, F4RLI vastly expanded mouse splenic CD8+ T lymphocytes, illustrating its potential in tumor immunotherapy. Further studies showed that the combination of F4RLI with the immune checkpoint blocker atezolizumab played a synergistic effect in treating MC38 mouse tumor by increasing the percentage of CD8+ T cells in tumor tissue. Moreover, the combination therapy of F4RLI with the angiogenesis inhibitor bevacizumab resulted in significant tumor growth suppression in a xenograft human HT-29 mouse model. Overall, our results demonstrate a homodimeric IL-15 superagonist F4RLI with advances in manufacturing processes and biopharmaceutical applications for cancer immunotherapy. KEY POINTS: • The homodimeric structure of F4RLI facilitates its easy production processes and quality control. • The fusion with Fc and sIL-15Rα extends the plasma half-life of IL-15 by about 28-fold. • F4RLI can play synergistic antitumor activity with the PD-1/PD-L1 checkpoint inhibitor or angiogenesis inhibitor.

Toosendanin suppresses African swine fever virus replication through upregulating interferon regulatory factor 1 in porcine alveolar macrophage cultures.

African swine fever virus (ASFV) is a highly infectious and lethal swine pathogen that causes severe socio-economic consequences in affected countries. Unfortunately, effective vaccine for combating ASF is unavailable so far, and the prevention and control strategies for ASFV are still very limited. Toosendanin (TSN), a triterpenoid saponin extracted from the medicinal herb Melia toosendan Sieb. Et Zucc, has been demonstrated to possess analgesic, anti-inflammatory, anti-botulism and anti-microbial activities, and was used clinically as an anthelmintic, while the antiviral effect of TSN on ASFV has not been reported. In this study, we revealed that TSN exhibited a potent inhibitory effect on ASFV GZ201801-38 strain in porcine alveolar macrophages (PAMs; EC50 = 0.085 µM, SI = 365) in a dose-dependent manner. TSN showed robust antiviral activity in different doses of ASFV infection and reduced the transcription and translation levels of ASFV p30 protein, viral genomic DNA quantity as well as viral titer at 24 and 48 h post-infection. In addition, TSN did not affect virion attachment and release but intervened in its internalization in PAMs. Further investigations disclosed that TSN played its antiviral role by upregulating the host IFN-stimulated gene (ISG) IRF1 rather than by directly inactivating the virus particles. Overall, our results suggest that TSN is an effective antiviral agent against ASFV replication in vitro and may have the potential for clinical use.

Highly Thermally Conductive Bimorph Structures for Low-Grade Heat Energy Harvester and Energy-Efficient Actuators.

Low-power electronics are urgently needed for various emerging technologies, e.g., actuators as signal transducers and executors. Collecting energy from ubiquitous low-grade heat sources (T < 100 °C) as an uninterrupted power supply for low-power electronics is highly desirable. However, the majority of energy-harvesting systems are not capable of collecting low-grade heat energy in an efficient and constant manner. Limited by materials and driving mode, fabrications of low-power and energy-efficient actuators are still challenging. Here, highly thermally conductive bimorph structures based on graphene/poly(dimethylsiloxane) (PDMS) structures have been fabricated as low-grade heat energy harvesters and energy-efficient actuators. Regular temperature fluctuations on bimorph structures can be controlled by nonequilibrium heat transfer, leading to stable and self-sustained thermomechanical cycles. By coupling ferroelectric poly(vinylidene fluoride) with bimorph structures, uninterrupted thermomechanoelectrical energy conversion has been achieved from the low-grade heat source. Utilizing the rapid thermal transport capability, multifinger soft grippers are assembled with bimorph actuators, demonstrating fast response, large displacement, and adaptive grip when driven by low-temperature heaters.